Camera

From IkuhluWiki

Required Software

Software to set the Ip address

IpUtility

Axis software

AxisSDK

Setup Instructions

1. Use the ip utility to discover the camera.
2. Set the ip address to 172.16.0.104.
3. After 30 seconds cycle power on the camera.
4. Browse to the camera website and set the password for root to ikuhlu
5. Install Axis SDK from download above.
6. Start Ikuhlu
7. Login as Admin (Default Password: 00000)
8. Click Menu --> Control Panel --> Command Prompt
9. Type the command

-Enable Camera Advanced

This will show the camera window, fill out the window with the following

1. IP: 172.16.0.104
2. User: root
3. Password: ikuhlu
4. Make sure enabled is set to true
5. Press Save
6. This may bring up a username / password dialog, it will be the same as you just typed.
7. Then reissue -Enable Camera Advanced to hide settings

-Enable Camera Advanced