Windows Mobile Bluetooth Connection

From IkuhluWiki

Jump to: navigation, search

Bluetooth Setup

Pairing instructions

Start on the pendant

File:01_PendantMainscreen.png 

Start on the main screen of the pendant.

File:02_PendantStart.png 

Click the windows logo.

File:03_PendantSettings.png 

Click settings.

File:04_PendantConnections.png 

On the bottom tab, select Connections.

File:05_PendantBluetooth.png 

Click on bluetooth.

File:06_PendantAccessabilityPairOff.png File:07_PendantAccessabilityPairOn.png 

Check the other devices can discover me checkbox.

File:08_ControllerControlPanel.png 

On the Ikuhlu Controller, go to Start > Control Panel.  Double click on Bluetooth Devices.

File:09_ControllerBluetoothDevices.png 

Click Add

File:10_ControllerBluetoothAddDevice.png File:11_ControllerBluetoothAddDevice2.png 

Check My Device is Setup and Ready to be Found, click next and Windows will search for availabe bluetooth devices

File:12_ControllerBluetoothSearch.png 

Select your device from the panel (Default: IkuPendant), and click next.

File:13_ControllerBluetoothPasskey.png 

Select the radio button Choose Passkey for me.

File:14_ControllerBluetoothPasskeyChosen.png 

Windows displays the passkey that you will need to enter in your device to complete the pairing process.

File:15_PendantEnterPasskey.png 

Enter the passkey from the Ikuhlu Controller on the pendant. Click Finish on the controller to complete.

Bluetooth PAN

Start on the Ikuhlu Controller

File:16_ControllerNetworkConnections.png 

On the Ikuhlu Controller, click start > Control Panel > Network Connections. 
Right click on Bluetooth Network Connection.

File:17_ControllerBluetoothNetwork.png 

Click on Properties.

File:18_ControllerBluetoothProperties.png 

In the properties screen scroll down and double click on Internet Protocol (TCP/IP).

File:19_ControllerBluetoothTCPIP.png 

Select Use the following IP address: and Set the IP address and Subnet mask according to the Image.
Click OK to save selections 
OK again on Bluetooth Network Connection Properties.

File:20_ControllerBluetoothPAN.png 

Double click on Bluetooth Area Network Connection. Next, select the pendant device 
(Default: IkuPendant), and click Connect

File:21_PendantStartIkuhlu.png 

On the pendant, start Ikuhlu Pendant software.

File:22_PendantSetup.png 

Click Controls > Setup.

File:23_PendantSetupPassword.png 

Click Edit, and enter editing password (Default: "Ikuhlu")

File:24_PendantSetupEdit.png 

Change the IP Address to "169.254.100.1" and click Set IP

File:25_PendantSetupSaved.png 

Click Save All, and Connect.

File:26_PendantConnected..png

Retrieved from "http://ikuhlu.richel.com/wiki/index.php/Windows_Mobile_Bluetooth_Connection"
Personal tools